Application Notes
SX126x Load Capacitance Calibration
Miromico SX126x-based LoRaWAN modules require a per-module crystal oscillator trim value (LoadCAP) to be applied in firmware at startup. This application note explains why the value is necessary, how to obtain it via the Loadcap Vault or module flash, and how to integrate it correctly into your application.
Internal Connection on FMLR Modules
All Miromico FMLR modules are a combination of an MCU and a transceiver chipset. This application note points out the details about the internal connection.
Active GNSS Antenna Supply on EVK-1110-STM
This application note shows the required hardware and firmware steps for GNSS scanning with an active GNSS antenna using a EVK-1110-STM.