Settings
Flags
A set of flags are used to toggle certain functionality:
| Flag | Description | Default |
|---|---|---|
| Confirmed uplinks | Confirmed uplinks are used for uplinks | Off |
| LED | Enable the on board LED on uplink (always enabled for join) | Off |
| ADR | Enable LoRaWAN Adaptive Data Rate | On |
| Continuous VOC | Enable measuring the IAQ every 3 minutes for better calibration. This can be disabled to save power, but the VOC values may not be accurate anymore | On |
General
| Setting | Description | Default |
|---|---|---|
| Measurement interval | The interval of sensor measurements in seconds | 900 |
| Send cycle | This value is used to determine the number of measurements which are accumulated before sending under normal circumstances: Number of measurements = Send cycle - 1 | 0 |
| Number of retransmissions | The amount of time a LoRaWAN uplink is retransmitted if no ACK is received with confirmed downlinks | 2 |