PoC Kit Advanced Configuration Guide

Get your Keys

In the PoC kit box, you will find a label with a QR code.

Use the link in the QR code to get your device keys as explained in our guide.

LoRaWAN Network Server

All kits are preconfigured with on a LoRaWAN network server for evaluation purposes. For advanced and additional configuration, you can log in to the LNS using credentials derived from the gateway MAC address (see also credentials).

The last 6 digits xxxyyy of the MAC address are used to build username and password as explained below. xxx is marked in green, yyy is marked in yellow. In our example, xxx is 500 and yyy is a29. All letters from MAC address are in lower case!

Important

Make sure you are using lower case letters from MAC address in email and password!

Loriot LNS

All kits with a part number ending on POC-xxxx-LOR are using Loriot LNS. You can log in using your credentials.

Please consult Loriot documentation for details about the Loriot LNS.

Loriot mioty service center

All mioty based PoC kits are using Loriot Service Center. You can log in using your credentials.

Please consult Loriot documentation for details about the Loriot LNS.

The Things Industries LNS

All kits with a part number ending on POC-xxxx-TTI are using TTI LNS. On TTI the username is according to the table below. Password for PoC kit dashboard is according to credentials.

	Schema	Example
Username	mypoc-xxxyyy	mypoc-500a29
Password	a12xxx_B34yyy	a12500_B34a29

Please consult The Things Stack Documentation for details about the TTI LNS.

Dashboard

The PoC kit dashboard is based on ThingsBoard. Consult ThingsBoard documentation to get started.

The dashboard is available on https://rms.miromico.io. For older kits, the dashboard is located at https://poc.miromico.io. Password for PoC kit dashboard is according to credentials.