Settings
Flags
A set of flags are used to toggle certain functionality:
| Flag | Description | Default |
|---|---|---|
| Duty Cycle | If flag is set, duty cycle requirements as per ETSI regulations are enforced by the device firmware. | On |
| Confirmed uplinks | If flag is set, event messages will be sent as confirmed messages | On |
| Transport mode | If flag is set, device will enter transport mode after a reset by magnet. This flag will be cleared every time device joins a network | On |
Configuration Options
The miro Logibutton offers the following options to adapt the functionality according to the use case requirements. See Payload on how to configure the devices using downlink messages
| Name | Description | Default | Unit |
|---|---|---|---|
| Mode | Event configuration (see Event Configuration) | 0x99 | |
| Nb of retransmissions | Number of retransmissions for confirmed messages | 8 | |
| Text transport mode | Display text in transport mode | «TRANSPORT» | Text |
| Text idle mode | Display text in idle mode | «IDLE» | Text |
| Text idle mode | Display text in idle mode | «ACTIVE» | Text |
| Text action idle short | Display text on short press in idle state | «IDL S» | text |
| Text action idle long | Display text on long press in idle state | «IDL L» | text |
| Text action active short | Display text on short press in active state | «ACT S» | text |
| Text action active long | Display text on long press in active state | «ACT L» | text |
| Text Joining | Display text while joining | «JOINING» | text |
| Text success idle short | Display text on successful transition from idle by short press | «SUCCESS IS» | text |
| Text success idle long | Display text on successful transition from idle by long press | «SUCCESS IL» | text |
| Text success active short | Display text on successful transition from active by short press | «SUCCESS AS» | text |
| Text success active long | Display text on successful transition from active by long press | «SUCCESS AL» | text |
| Text Joined | Display text on join success | «JOINED» | text |
| Text fail idle short | Display text on failed transition from idle by short press | «FAIL IS» | text |
| Text fail idle long | Display text on failed transition from idle by long press | «FAIL IL» | text |
| Text fail active short | Display text on failed transition from active by short pres | «FAIL AS» | text |
| Text fail active long | Display text on failed transition from active by long press | «FAIL AL» | text |
| Text Join failed | Display text on join failed | «JOIN FAIL» | text |
| duration_magnet | Time to apply magnet to activate device in transport mode | 20 | 100 ms |
| duration_magnet reset | Time to apply magnet to reset device | 80 | 100 ms |
| duration_short_min | Minimum button press time for short press | 10 | 100 ms |
| duration_short_max | Maximum button press time for short press | 20 | 100 ms |
| duration_long_min | Minimum button press time for long press | 30 | 100 ms |
| duration_long_max | Maximum button press time for long press | 40 | 100 ms |
| duration_idle_timeout | Time to show message in idle mode (set to 0 for allways on) | 50 | 100 ms |
| duration_active_timeout | Time to show message in active mode (set to 0 for allways on) | 0 | 100 ms |
| duration_result_is | Time to show transition result (success/fail) on idle short press | 20 | 100 ms |
| duration_result_il | Time to show transition result (success/fail) on idle long press | 20 | 100 ms |
| duration_result_as | Time to show transition result (success/fail) on active short press | 20 | 100 ms |
| duration_result_al | Time to show transition result (success/fail) on active long press | 20 | 100 ms |
| duration_joined_timeout | Time to show join result (success/fail) | 20 | 100 ms |
| interval_status | Status message interval | 1440 | minute |
| interval_temperature | Temperature measurement interval | 300 | second |
Event Configuration
For each action (short or long press) in both of the two states (idle and active) the state transition can be configured or disabled. For each state/action combination, there are the following settings available:
- Disable (0)
- Transition to idle (1)
- Transition to active (2)
If a transition is disabled it will not be offered to the user. If, for example, short press from active to idle is disabled, the user can only use long press. Obviously, there needs to be at least one active transition for idle state.
Warning
When configuring events, it is important to make sure there are no "dead states" (e.g. transition from idle to active with no transition back). The device will reject such configurations, which will possibly lead to unexpeced device misconfiguration.