Skip to content

EVK-1110-STM

P/N: DEV-FMLR-STEVK6

Overview

The EVK-1110-STM is to evaluate FMLR-1110-STM module. The EVK is assembled with FMLR-1110-STL0Z-4M module.

EVK-1110-STM

The kit contains:

  • EVK break-out board with modules and jumpers
  • USB cable
  • Wifi & LoRa antenna
  • Active GPS antenna incl. U.FL to SMA adapter

Assemble the kit as shown in the picture above.

EVK Details and Getting Started

For details about pin out and jumper settings, see Pinout / Jumpers. Follow the Getting started guide to bring up the EVK and receive data over LoRaWAN. See also EVK-1110-STM Schematics for more details.

The pre-flashed firmware is sending sensor data to a LoRaWAN network server. For payload documentation, see EVK Payload Format.

Development

To develop on the EVK-1110-STM we recommend to use LoRa Basic Modem. To program and debug, use the on-board SEGGER J-Link programmer. See On-Board J-Link for instructions on how to use the programmer and virtual COM port.

Further readings and documentation: