EVK Overview
FMLR Module Evaluation Kits
Our FMLR module evaluation kits will get you started within minutes. All kits are delivered with preloaded firmware to send data to a LoRaWAN® network server right a way.
You can start your journey from here, bring up your LoRaWAN® setup before you dive into the development experience. We keep the transition to development as simple as possible with the integrated J-Link programmer.
All kits are based on the same break-out board providing the following features:
- Access to all module pins
- Power supply over USB (micro USB connector)
- User button, reset button
- RBG LED
- SHT31 relative humidity and temperature sensor
- LIS2DW accelerometer
- On-board J-Link programmer and debugger
EVK Variants
Evaluation kits are available for all FMLR products.
| EVK | Partnumber | MCU | Module |
|---|---|---|---|
| EVK-72-STM | DEV-FMLR-STEVK1 | STM32L0 | FMLR-72-U-STL0Z-4M |
| EVK-61-REN (EOL) | DEV-FMLR-RSEVK2 | S3A6 | FMLR-61-U-RSS3-4M |
| EVK-61-MAX | DEV-FMLR-MAEVK3 | MAX32625 | FMLR-61-P-MA625 |
| EVK-80-STM | DEV-FMLR-STEVK4 | STM32L4 | FMLR-80-U-STL4E-4M |
| EVK-61-STM | DEV-FMLR-STEVK5 | STM32L0 | FMLR-61-U-STL0Z-4M |
| EVK-1110-STM | DEV-FMLR-STEVK6 | STM32L0 | FMLR-1110-U-STL0Z-4M |
| EVK-WL-STM | DEV-FMLR-STEVK7 | STM32WLE5 | FMLR-WLHP-U-STE5B |
EVK First Steps
All evaluation kits are delivered with preloaded firmware with the following functionalities:
- Blinking RGB LED at start-up
- Joining over LoRaWAN
- Periodic temperature and humidity sensor read-out and transmit over LoRaWAN®
Follow the step-by-step guide to get the EVK up and running with no programming required.
The example firmware is also available for download.
Your typical setup to get started looks like:
